Table of Contents
Advertisement
FDE470
Specifications:
The standard finish for this machine is painted
enamel. A stainless steel panel kit may be installed
at the field level to change the finish to stainless
steel. The kit number is: SPKFD470
Scotsman ice machines, like the FDE470, are
designed to be installed indoors, in a controlled
environment. The minimum and maximum
operating conditions are:
Minimum Air Temperature: 50
Maximum Air Temperature: 100
Minimum Water Temperature: 40
Maximum Water Temperature: 100
60 Hz voltage may vary between 104 and 126
volts.
Water Pressure may vary between 20 and 80
psi.
Operating the machine outside these conditions
constitutes misuse and voids the warranty.
Model Number Dimensions
W" x D" x H"
FDE740AE-1A 14 x
3
23
x
7
27
o
F.
o
F.
o
F.
o
F.
Basic
Bin
Electrical
Capacity
115/60/1
12 lb.
August 1994
Page 2
Scotsman Ice Systems are designed and
manufactured with the highest regard for safety
and performance. They meet or exceed the
standards of UL, NSF and CSA.
Scotsman assumes no liability or responsibility of
any kind for products manufactured by Scotsman
that have been altered in any way, including the
use of parts and/of other components not
specifically approved by Scotsman.
Scotsman reserves the right to make design
changes and/or improvements at any time.
Specifications and designs are subject to change
without notice.
Ice Making
Refrigerant
Capacity
Charge
(R134a)
470 lb./24Hr 14 oz.
4
8
Min.
Max
Circuit
Fuse Size
Ampacity
14.6
20
Advertisement
Table of Contents
