For The Electrician - Scotsman FDE470 Service Manual

FDE470

For The Electrician

Electrical connections:
Check the nameplate for voltage and current
requirements. An electrical cord is not supplied.
Connect the FDE470 to a separate electrical
circuit. Wiring to the machine must conform to all
codes. A licensed electrician may be required in
some situations.
Remove the back panel to make the electrical
connection. The electrical connection is made on
the terminal strip in the junction box inside the
FOLLOW ALL APPLICABLE LOCAL,
machine. Replace the back panel when the
STATE AND NATIONAL CODES
electrical connections are complete.
This Unit MUST BE GROUNDED
Electrical
Power
Remove Back Panel To
Expose Junction Box
August 1994
Page 4