Table of Contents
Advertisement
MC330, MC430, and ECC Condensing Unit
Remote Low Side User Manual
Technical Specifications
Model
Electrical
(volts/Hz/phase)
MC330SL-1E 115/60/1
MC430SL-1E 115/60/1
ECC1200-32
208-230/60/1
ECC1410-3
208-230/60/3
ECC1410-32
208-230/60/1
ECC1800-3
208-230/60/3
* See Cabinet Drawings for exact dimensions .
Location Limitations
Maximum Distance between Head and Condensing
Unit: Limited to the length of the longest available
single tubing kit, 75 feet .
Maximum Condensing Unit Elevation over Ice Making
Head: 35 feet .
Note: Elevations greater than 20 feet require
installation of a suction line trap at the 20 foot mark .
Maximum Ice Making Head Elevation over
Condensing Unit: 15 feet .
Line Routing:
•
Allowed: One rise after a drop .
•
Allowed: One drop after a rise .
•
Not Allowed: More than one rise after a drop
•
Not Allowed: More than one drop after a rise .
Model Number Locations
Ice Making Head
The dataplate on the back of the ice machine contains
the model number, serial number and electrical data .
A second plate, located behind the front panel at
the lower right front, also lists the model and serial
numbers .
Minimum
Maximum
Circuit
Fuse Size
Ampacity
3
15
3
15
17 .7
30
11 .6
20
15 .8
30
19 .0
30
Condensing unit
The dataplate on the condensing unit contains the
model number, serial number, electrical data and
system refrigerant charge .
A second plate, located behind the front panel in front
of the compressor, also lists the model number, serial
number and refrigerant charge .
June 2022
Page 3
System
Cabinet Size*
Charge oz of
w" x d" x h"
R-404A
-
30 x 24 x 23
-
30 x 24 x 29
248
32 x 39 x 39 .75
248
32 x 39 x 39 .75
248
32 x 39 x 39 .75
232
32 x 39 x 39 .75
Approx . Unit
Weight (lb)
130
165
Advertisement
Table of Contents
