1 General
1.1
Application
GHH RAND builds and supplies the CS85 screw compressor and the CS1050 compressor units for installa‑
tion on silo vehicles for the connection‑ready unit.
Because of their oil‑free compression of atmospheric air and their power‑to‑weight ratio for installation
on silo vehicles, the compressor unit is used to pneumatically convey bulk goods, such as flour, sugar,
salt, animal feed, powdered chemicals, dry granulate, soda, cement, sand, lime, plaster, etc.
The products built and supplied by GHH RAND are only designed for the operation at and on utility
vehicles that exclusively drive on paved roads.
A different use requires consultation with the manufacturer.
1.2
Manufacturer's address
GHH RAND
Schraubenkompressoren GmbH
Max-Planck-Ring 27
46049 Oberhausen
1.3
Screw compressor type plate
The type plate is attached to the side of the screw compressor.
It contains the following information:
·
Type
·
Serial no.
·
Rotational speed range
·
max. volume flow
·
At max. operating pressure
·
max. power consumption
NOTE
The complete identification has certificate value and may not be changed or rendered illegible.
47757783 A
General
7