Advertisement
3-2) Press the OK button. The machine becomes ready for the next operation.
4) Color pattern check
4-1) The color pattern is displayed on the LCD. Visually confirm that the patterns are displayed properly.
4-2) Press the ON button. The machine becomes ready for the next operation. Press the ON button again to turn
off the machine.
(5) Ink absorber counter setting
Set the ink absorber counter value to a new EEPROM after the logic board is replaced in servicing.
1) Before replacement of the logic board, check the ink absorber counter value in EEPROM information print.
2) After replacement of the logic board, the ink absorber counter value should be set in the service mode using
the Service Tool.
In the Ink Absorber Counter section of the Service Tool, select Main from the Absorber pull-down menu.
From the Counter Value(%) pull-down menu, select the value (in 10% increments) which is the closest to
the actual counter value confirmed before replacement of the logic board, and click Set.
3) Print EEPROM information to confirm that the value is properly set to the EEPROM.
(6) Disc label print position correction
Set the disc label print position value to a new EEPROM after the logic board is replaced in servicing.
This function can be also used in solving user complaints in the field, however, use of the application software is
recommended for solution of user complaints.
1) Before replacement of the logic board, check the disc label print position value in EEPROM information
print.
2) After replacement of the logic board, set the disc label print position value in the service mode using the
Service Tool, CD-R Correction section.
51 / 66
Advertisement
