Definitions/Warning/Caution - SmartVent SYN1015AD Installation Instructions Manual

DEFINITIONS
Before use please read and understand these definitions.
WARNING and/or the use of the symbol
injury, or death, exists if the procedure is not followed.
CAUTION CAUTION indicates the possibility of damage to the equipment, installation
or premises if a procedure is not followed.
NOTE NOTE provides additional information intended to clarify points,
procedures or instructions.
WARNING
- Please read all instructions carefully before commencing installation.
- This appliance is not intended for use by persons (including children) with reduced
physical, sensory or mental capabilities, or lack of experience and knowledge, unless they
have been given supervision or instruction concerning use of the appliance by a person
responsible for their safety.
- Children should be supervised to ensure that they do not play with the appliance.
- Precautions must be taken to avoid the backflow of gases into the room from the open
flue of gas or other open-fire appliances when mounted in outside walls or soffits.
- Isolate the mains supply before making any electrical connections. This system should be
installed by a qualified electrician.
- A means of mains power isolation must be installed in the circuit for the purpose of safe
access for any internal cleaning, recalibration or maintenance.
- Isolate the mains supply before attempting to replace the systems air filter.
CAUTION
- If any of the fan or controller supply cords are damaged they must be replaced by the
manufacturer, its service agent or similarly qualified persons in order to avoid possible
damage to the fan motor or controller.
- All wiring must comply with national wiring rules.
- Any changes or modifications made or attempted to this product, without the prior written
approval of the manufacturer, will void any and all stated warranties.
- Take appropriate safety measures when cutting hazardous building materials.
- The roof space MUST be inspected to ensure it does not have any conditions that may
cause the system to draw moisture into the home. Conditions may include: unducted
bathroom or kitchen extraction, roof leaks, tile roofs requiring re-coating, open wall cavities,
gutter leaks or other building envelope leaks.
- Ceiling penetrations/openings (i.e. access hatch, open backed down lights) between the
living spaces and roof space reduce the effectiveness of the system. These should be
sealed where possible.
4
refers to conditions where the possibility of