"Remove the touchpad board cable" on page 35
"Remove the system board and the heat sink" on page 36
"Remove the LCD module" on page 37
Go to
https://support.lenovo.com/partslookup
part:
Upper case
Disassemble the LCD module
The LCD module as a whole is not a FRU. Instead, it contains FRUs as its components. Before
disassembling the LCD module, make sure it has been detached from the upper case.
Remove the hinge rubber
Make sure the following FRU (or CRU) has been removed.
"Remove the LCD module" on page 37
Step 1.
Remove the hinge rubber.
Figure 19. Remove the hinge rubber
Go to
https://support.lenovo.com/partslookup
part:
Hinge rubber
Remove the strip cover
Make sure the following FRU (or CRU) has been removed.
"Remove the LCD module" on page 37
Step 1.
Remove the strip cover.
to look up the Lenovo part number of the following replacement
to look up the Lenovo part number of the following replacement
.
Chapter 5
Removing a FRU or CRU
39