"Remove the camera foil" on page 42
Step 1.
Disconnect the EDP cable from the sensor board and the LCD panel. Remove the EDP cable and
the camera board.
Figure 26. Remove the camera board and the EDP cable
Step 2.
Separate the EDP cable from the camera board.
Figure 27. Separate the EDP cable from the camera board
Step 3.
Remove the microphone rubber from the camera board.
Figure 28. Remove the microphone rubber from the camera board
Go to
https://support.lenovo.com/partslookup
replacement parts:
EDP cable
to look up the Lenovo part numbers of the following
.
Chapter 5
Removing a FRU or CRU
43