Camera board
Microphone rubber
Remove the hinges
Make sure the following FRUs (CRUs) have been removed.
"Remove the LCD module" on page 37
"Remove the strip cover" on page 39
"Remove the LCD panel" on page 40
Step 1.
Remove six screws and then remove the hinges.
Figure 29. Remove six screws and remove the hinges
Screw specifications
M2 x L3
Go to
https://support.lenovo.com/partslookup
part:
Hinges
Remove the LCD cover
Make sure the following FRUs (CRUs) have been removed.
"Remove the LCD module" on page 37
"Remove the hinge rubber" on page 39
"Remove the strip cover" on page 39
"Remove the LCD panel" on page 40
"Remove the sensor board" on page 41
"Remove the camera foil" on page 42
"Remove the camera board, the EDP cable and the microphone rubber" on page 42
"Remove the hinges" on page 44
Go to
https://support.lenovo.com/partslookup
part:
44
Hardware Maintenance Manual
Number of screws
6
to look up the Lenovo part number of the following replacement
to look up the Lenovo part number of the following replacement