Go to
https://support.lenovo.com/partslookup
part:
I/O board cable
Remove the I/O board
Make sure the following FRU (or CRU) have been removed.
"Remove the lower case" on page 30
Step 1.
Disconnect the battery pack cable from the system board.
Attention: Use your fingernails to pull the connector to unplug it. Do not pull the cable.
Step 2.
Disconnect cables connected to the I/O board.
Figure 9. Disconnect cables connected to the I/O board
Step 3.
Remove one screw and then remove the I/O board.
Figure 10. Remove one screw and remove the I/O board
34
Hardware Maintenance Manual
to look up the Lenovo part number of the following replacement