Specifications - Makita HR2630T Instruction Manual

ENGLISH
(Original instructions)
1 Switch trigger
2 Lock button
3 Lamp
4 Reversing switch lever
5 Quick change chuck for SDS-
plus
6 Change cover line
7 Change cover
8 Spindle
9 Quick change drill chuck
10 Rotation with hammering
11 Action mode changing knob
12 Rotation only
13 Hammering only

SPECIFICATIONS

Model
Concrete
Core bit
Diamond core bit
Capacities
(dry type)
Steel
Wood
No load speed
Blows per minute
Overall length
Net weight
Safety class
• Due to our continuing program of research and development, the specifications herein are subject to change without
notice.
• Specifications may differ from country to country.
• The weight may differ depending on the attachment(s). The lightest and heaviest combination, according to EPTA-
Procedure 01/2014, are shown in the table.
Intended use
The tool is intended for hammer drilling and drilling in
brick, concrete and stone.
It is also suitable for drilling without impact in wood,
metal, ceramic and plastic.
Power supply
The tool should be connected only to a power supply of
the same voltage as indicated on the nameplate, and can
only be operated on single-phase AC supply. They are
double-insulated and can, therefore, also be used from
sockets without earth wire.
Explanation of general view
14 Hook
15 Protrusions
16 Grooves
17 Bit shank
18 Bit grease
19 Bit
20 Chuck cover
21 Grip base
22 Depth gauge
23 Toothed side of hex hole
marking on the grip base
24 Toothed side of the depth gauge
25 Dust cup
26 symbol
HR2631F HR2631FT
26 mm
80 mm
–1
0 – 1,200 min
–1
0 – 4,600 min
361 mm 385 mm
2.9 – 3.4 kg 3.1 – 3.6 kg
ENE042-1
ENF002-2
27 Attachment at the foot of dust
28 Bellows
29 Attachment
30 Inside periphery
31 Flat side
32 Cap
33 Groove
34 Blow-out bulb
35 Drill chuck assembly (optional
36 Chuck key
37 Sleeve
38 Ring
HR2641 HR2320T
23 mm
68 mm
70 mm
13 mm
32 mm
0 – 1,100
–1
min
0 – 4,500
–1
min
422 mm 380 mm
3.1 – 3.5 kg 2.9 – 3.2 kg
/II
General power tool safety warnings
WARNING: Read all safety warnings, instruc-
tions, illustrations and specifications provided with
this power tool. Failure to follow all instructions listed
below may result in electric shock, fire and/or serious
injury.
Save all warnings and instructions for future
reference.
The term "power tool" in the warnings refers to your
mains-operated (corded) power tool or battery-operated
(cordless) power tool.
cup
accessory)
HR2630 HR2630T
26 mm
80 mm
–1
0 – 1,200 min
–1
0 – 4,600 min
361 mm 385 mm
2.8 – 3.3 kg 3.0 – 3.5 kg
GEA010-2
7