Table of Contents
Advertisement
SPECIFICATIONS
Model:
Capacities
No load speed
Blows per minute
Rated voltage
Overall length
Net weight
Optional accessory
Model:
Suction performance
Operating stroke
Suitable drill bit
Rated voltage
Net weight
•
Due to our continuing program of research and development, the specifications herein are subject to change
without notice.
•
Specifications may differ from country to country.
•
The weight may differ depending on the attachment(s), including the battery cartridge. The lightest and heavi-
est combination, according to EPTA-Procedure 01/2014, are shown in the table.
Applicable battery cartridge and charger
Battery cartridge
Charger
•
Some of the battery cartridges and chargers listed above may not be available depending on your region of
residence.
WARNING:
Only use the battery cartridges and chargers listed above. Use of any other battery cartridges
and chargers may cause injury and/or fire.
Symbols
The followings show the symbols used for the equip-
ment. Be sure that you understand their meaning before
use.
Read instruction manual.
Only for EU countries
Ni-MH
Li-ion
Do not dispose of electric equipment or
battery pack together with household waste
material!
In observance of the European Directives,
on Waste Electric and Electronic
Equipment and Batteries and Accumulators
and Waste Batteries and Accumulators
and their implementation in accordance
with national laws, electric equipment and
batteries and battery pack(s) that have
reached the end of their life must be col-
lected separately and returned to an envi-
ronmentally compatible recycling facility.
Concrete
Core bit
Diamond core bit (dry type)
Steel
Wood
with BL4025
with BL4040
HR001G
HR002G
D.C. 36 V - 40 V max
358 mm
389 mm
373 mm
404 mm
3.9 - 4.6 kg
4.1 - 4.6 kg
DX12 (For HR001G/HR003G)
D.C. 36 V - 40 V max
Intended use
The tool is intended for hammer drilling and drilling in
brick, concrete and stone as well as for chiselling work.
It is also suitable for drilling without impact in wood,
metal, ceramic and plastic.
SAFETY WARNINGS
General power tool safety warnings
WARNING:
Read all safety warnings, instruc-
tions, illustrations and specifications provided
with this power tool. Failure to follow all instructions
listed below may result in electric shock, fire and/or
serious injury.
2 ENGLISH
HR003G
28 mm
54 mm
65 mm
13 mm
32 mm
-1
0 - 980 min
-1
0 - 5,000 min
358 mm
373 mm
3.9 - 4.6 kg
DX14 (For HR002G/HR004G)
350 l/min
Up to 190 mm
Up to 260 mm
1.6 kg
BL4025 / BL4040
DC40RA
HR004G
389 mm
404 mm
4.0 - 4.5 kg
Advertisement
Table of Contents
