Remove The Solid-State Drive (Ssd); Remove The Wi-Fi Card; Remove The Solid-State Drive (Ssd) Plate - Lenovo IdeaPad Pro 5i Hardware Maintenance Manual

Remove the solid-state drive (SSD)

Make sure the following FRUs (or CRUs) have been removed.
"Remove the lower case" on page 28
"Remove the solid-state drive (SSD) plate" on page 30
Step 1. Remove one screw and then remove the SSD by pulling it away from the slot.
Figure 8. Remove the SSD
Screw specifications
M2 x L2.5
Go to https://support.lenovo.com/partslookup
replacement parts:
Solid-state drive (SSD)

Remove the Wi-Fi card

Make sure the following FRU (or CRU) has been removed.
"Remove the lower case" on page 28
Step 1. Disconnect the battery pack cable from the system board.
Attention: Use your fingernails to pull the connector to unplug it. Do not pull the cable.
Step 2. Detach the main and auxiliary antenna cable connectors. Remove one screw and then remove the
Wi-Fi card by pulling it away from the slot.
Number of screws
1
to look up the Lenovo part numbers of the following
.
Chapter 4 Removing a FRU or CRU
31