Table of Contents
Advertisement
●
If faces are not detected, or when only gray frames are displayed
(without a white frame), up to nine green frames are displayed in
the areas in focus when you press the shutter button halfway.
If faces are not detected when Servo AF ( = 79) is set to [On],
●
the AF frame is displayed in the center of the screen when you
press the shutter button halfway.
●
Examples of faces that cannot be detected:
-
Subjects that are distant or extremely close
-
Subjects that are dark or light
-
Faces in profile, at an angle, or partly hidden
●
The camera may misinterpret non-human subjects as faces.
●
No AF frames are displayed if the camera cannot focus when you
press the shutter button halfway.
Choosing Subjects to Focus On (Tracking AF)
Shoot after choosing a subject to focus on as follows.
1
Choose [Tracking AF].
●
Follow the steps in "Changing the
AF Frame Mode" ( = 77) to choose
[Tracking AF].
●
[ ] is displayed in the center of the
screen.
2
Choose a subject to focus on.
●
Aim the camera so that [ ] is on the
desired subject, and then press the [ ]
button.
Still Images
Movies
●
When the subject is detected, the camera
beeps and [
] is displayed. Even if the
subject moves, the camera will continue
to track the subject within a certain range.
●
If no subject is detected, [ ] is displayed.
●
To cancel tracking, press the [ ] button
again.
3
Shoot.
●
Press the shutter button halfway. [
changes to a blue [
], which follows
the subject as the camera continues to
adjust the focus and exposure (Servo AF)
( = 79).
●
Press the shutter button all the way down
to shoot.
●
Even after your shot, [
and the camera continues to track the
subject.
[Servo AF] ( = 79) is set to [On] and cannot be changed.
●
●
Tracking may not be possible when subjects are too small or
move too rapidly, or when subject color or brightness matches
that of the background too closely.
] tab of MENU ( = 29) is not
●
[AF-Point Zoom] on the [
available.
●
[
] is not available.
●
The camera can detect subjects even if you press the shutter
button halfway without pressing the [ ] button. After your shot,
[
] is displayed in the center of the screen.
●
When shooting in [
] mode ( = 75), press and hold the [ ]
button for at least one second.
●
If [Face ID] is set to [On], names will not display when registered
people are detected, but the names will be recorded in the still
images ( = 44). However, the name is displayed when a
registered person is selected as a subject.
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode /
Hybrid Auto Mode
]
Other Shooting Modes
P Mode
Tv, Av, and M Mode
Playback Mode
] is still displayed
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
78
Advertisement
Table of Contents
