Customizing The Self-Timer; Continuous Shooting - Canon PowerShot SX720 HS User Manual

Hide thumbs Also See for PowerShot SX720 HS:
Table of Contents

Advertisement

Customizing the Self-Timer

You can specify the delay (0 – 30 seconds) and number of shots (1 – 10).
1
Choose [ ].
Following step 1 in "Using the Self-Timer"
( = 42), choose [ ] and press the
[
] button.
2
Configure the setting.
Press the [ ][ ] buttons to choose the
delay time or number of shots.
Press the [ ][ ] buttons or turn the [ ]
dial to choose a value, and then press the
[ ] button.
Once the setting is complete, [ ] is
displayed.
Follow step 2 in "Using the Self-Timer"
( = 42) to shoot.
For movies recorded using the self-timer, recording begins after
your specified delay time, but specifying the number of shots has
no effect.
When you specify multiple shots, image brightness and white
balance are determined by the first shot. More time is required
between shots when the flash fires or when you have specified
to take many shots. Shooting will stop automatically when the
memory card becomes full.
When a delay longer than two seconds is specified, two seconds
before the shot, the lamp blinking and self-timer sound will speed
up. (The lamp will remain lit in case the flash fires.)

Continuous Shooting

Still Images
Movies
In [
continuously.
For details on the continuous shooting speed, see "Camera" ( = 177).
Still Images
] mode, hold the shutter button all the way down to shoot
1
Configure the setting.
Press the [ ] button, choose [
menu, and then choose [
Once the setting is complete, [
displayed.
2
Shoot.
Hold the shutter button all the way down
to shoot continuously.
During continuous shooting, the focus, exposure, and colors are
locked at the position/level determined when you pressed the
shutter button halfway.
Cannot be used with the self-timer ( = 42).
Shooting may stop momentarily or continuous shooting may slow
down depending on shooting conditions, camera settings, and the
zoom position.
As more shots are taken, shooting may slow down.
Shooting may slow down if the flash fires.
Multi-area White Balance ( = 32) is not available. Similarly, [Hg
Lamp Corr.] ( = 50) is set to [Off] and cannot be changed.
Before Use
Basic Guide
Movies
Advanced Guide
Camera Basics
Auto Mode /
Hybrid Auto Mode
] in the
] ( = 28).
Other Shooting Modes
] is
P Mode
Tv, Av, and M Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
43

Advertisement

Table of Contents
loading

Table of Contents