Canon PowerShot SX720 HS User Manual page 134

Hide thumbs Also See for PowerShot SX720 HS:
Table of Contents

Advertisement

2
Choose the type of images to send
(only when sending movies with
images).
Press the [
[Wireless settings] on the [
then choose [Wi-Fi Settings] ( = 29).
Press the [ ][ ] buttons to choose
[Image Sync], and then press the [ ][ ]
buttons to choose [Stills/Movies].
Preparing the Computer
Install and configure the software on the destination computer.
1
Install Image Transfer Utility.
Install Image Transfer Utility on a
computer connected to the Internet
( = 151).
You can download the Image Transfer
Utility from the CANON iMAGE
GATEWAY Image Sync setting screen
( = 125).
2
Register the camera.
Windows: In the taskbar, right-click [
and then click [Add new camera].
Mac OS: In the menu bar, click [
then click [Add new camera].
A list of cameras linked to CANON
iMAGE GATEWAY is displayed. Choose
the camera from which images are to be
sent.
Once the camera is registered and the
computer is ready to receive images, the
icon changes to [
Sending Images
Images sent from the camera are automatically saved to the computer.
] button, choose
If the computer that you intend to send images to is turned off, the images
] tab, and
will be stored temporarily on the CANON iMAGE GATEWAY server.
Stored images are regularly erased, so make sure to turn on the computer
and save the images.
],
], and
].
1
Send images.
Following steps 1 – 2 in "Uploading
Images to Web Services" ( = 127),
choose [ ].
Images labeled with a [ ] icon have
been transferred.
2
Save the images to the computer.
Images are automatically saved to the
computer when you turn it on.
Images are automatically sent to Web
services from the CANON iMAGE
GATEWAY server, even if the computer
is off.
When sending images, you should use a fully charged battery pack.
Even if images were imported to the computer through a different
method, any images not sent to the computer via CANON iMAGE
GATEWAY will be sent to the computer.
Sending is faster when the destination is a computer on the same
network as the camera, because images are sent via the access
point instead of CANON iMAGE GATEWAY. Note that images
stored on the computer are sent to CANON iMAGE GATEWAY, so
the computer must be connected to the Internet.
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode /
Hybrid Auto Mode
Other Shooting Modes
P Mode
Tv, Av, and M Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
134

Advertisement

Table of Contents
loading

Table of Contents