Digital Tele-Converter; Changing The Af Frame Mode; Center; Basic Guide - Canon PowerShot SX720 HS User Manual

Hide thumbs Also See for PowerShot SX720 HS:
Table of Contents

Advertisement

Digital Tele-Converter

The focal length of the lens can be increased by approximately 1.6x or
2.0x. This can reduce camera shake because the shutter speed is faster
than it would be if you zoomed (including using digital zoom) in to the
same zoom factor.
Press the [
[Digital Zoom] on the [
choose the desired option ( = 29).
The view is enlarged and the zoom factor
is displayed on the screen.
The shutter speed may be equivalent when you move the zoom
lever all the way toward [
] for maximum telephoto, and when
you zoom in to enlarge the subject to the same size following step
2 in "Zooming In Closer on Subjects (Digital Zoom)" ( = 38).

Changing the AF Frame Mode

Change the AF (auto focus) frame mode to suit the shooting conditions as
follows.
Press the [
Frame] on the [
the desired option ( = 29).
One AF frame is displayed in the center. Effective for reliable focusing.
Still Images
Movies
] button, choose
] tab, and then
Still Images
Movies
Detects people's faces, and then sets the focus, exposure (evaluative
metering only), and white balance ([
After you aim the camera at the subject, a white frame is displayed
] button, choose [AF
around the person's face determined by the camera to be the main
] tab, and then choose
subject, and up to two gray frames are displayed around other
detected faces.
When the camera detects movement, frames will follow moving
subjects, within a certain range.
After you press the shutter button halfway, up to nine green frames are
displayed around faces in focus.

Center

A yellow AF frame is displayed with [
focus when you press the shutter button halfway.
To reduce the AF frame size, press the [
] tab to [Small] ( = 29).
[AF Frame Size] on the [
The AF frame size is set to [Normal] when you use the digital
zoom ( = 38) or digital tele-converter ( = 77), and in manual
focus mode ( = 75).
To compose shots so that subjects are positioned at the edge or
in a corner, first aim the camera to capture the subject in an AF
frame, and then hold the shutter button halfway down. As you
continue to hold the shutter button halfway, recompose the shot
as desired, and then press the shutter button all the way down
(Focus Lock).
The AF frame position is enlarged when you press the shutter
button halfway with [AF-Point Zoom] ( = 51) set to [On].

Face AiAF

] only).
Before Use
Still Images
Movies

Basic Guide

Advanced Guide
] if the camera cannot
Camera Basics
Auto Mode /
] button and set
Hybrid Auto Mode
Other Shooting Modes
P Mode
Tv, Av, and M Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Still Images
Movies
Appendix
Index
77

Advertisement

Table of Contents
loading

Table of Contents