TYAN S8050 Manual page 88

3.3.16.3.2 MAC A0:42:3F:37:EA:08
iSCSI Mode
Disabled, Enabled, Enabled for MPIO.
Disabled / Enabled / Enabled for MPIO
Internet Protocol
Initiator IP address is system assigned in IP6 mode. In Autoconfigure mode, iSCSI
driver will attempt to connect iSCSI target via IPv4 stack, if failed then attempt IPv6
stack.
IPv4 / IPv6 / Autoconfigure
Connection Retry Count
The minimum value is 0 and the maximum is 16. 0 means no retry.
Connection Establishing Timeout
The timeout value in milliseconds. The minimum value is 100 milliseconds and the
maximum is 20 seconds.
88
http://www.tyan.com