Sitecom WLR-8200 User Manual page 45

Backup Settings
The Backup screen allows you to save (Backup) the current configuration settings. When you
save the configuration setting (Backup) you can re-load the saved configuration into the router
through the Restore selection. If extreme problems occur you can use the Restore to Factory
Defaults selection, this will set all configurations to its original default settings (e.g. when you
first purchased the router).
Use the "Backup" tool to save the current configuration to a file named "config.bin" on your PC.
You can then use the "Restore" tool to restore the saved configuration to the router.
Alternatively, you can use the "Restore to Factory Defaults" tool to force the router to perform a
power reset and restore the original factory settings.
Reset
You can reset the router's system should any problem exist. The reset function essentially re-
boots your router's system.