Sitecom WLR-8200 User Manual page 34

URL block
You can block access to some Web sites from particular PCs by entering a full URL address or
just keywords of the Web site.

Enable: URL Blocking Enable/disable URL Blocking

Add URL/keyword: Fill in "URL/Keyword" and then click "Add". You can enter the full URL
address or the keyword of the web site you want to block.

Remove URL/keyword: If you want to remove some URL keywords from the "Current
URL Blocking Table", select the URL keyword you want to remove in the table and then
click "Delete Selected". If you want remove all URL keywords from the table, just click
"Delete All" button. If you want to clear the selection and re-select again, just click
"Reset".
Click Apply at the bottom of the screen to save the above configuration.