Sitecom WLR-8200 User Manual page 20

•
IP address 192.168.0.1: It is the router's LAN IP address (Your LAN clients default
gateway IP address).
•
IP Subnet Mask 255.255.255.0: Specify a Subnet Mask for your LAN segment.
•
802.1d Spanning Tree: Disabled by default. If the 802.1d Spanning Tree function is
enabled, this router will use the spanning tree protocol to prevent network loops.
•
DHCP Server: Enabled by default. You can enable or disable the DHCP server. When
DHCP is disabled no ip-addresses are assigned to clients and you have to use static
ip-addresses. When DHCP server is enabled your computers will be assigned an ip-
address automatically until the lease time expires.
•
Lease Time: One Week. In the Lease Time setting you can specify the time period
that the DHCP lends an IP address to your LAN clients. The DHCP will change your
LAN client's IP address when this time threshold period is reached.
•
IP Address Pool: You can select a particular IP address range for your DHCP server to
issue IP addresses to your LAN Clients. The default IP range is 192.168.0.100 ~
192.168.0.200. If you want your PC(s) to have a static/fixed IP address, then you'll
have to choose an IP address outside this IP address Pool
•
Domain Name: You can specify a Domain Name for your LAN or just keep the default
(sitecom.router).
Device Status
View the router's current configuration settings. Device Status displays the configuration
settings you've configured in the Internet Settings and WiFi Settings sections.