Advertisement
8/30/23, 12:14 PM
3) Put the battery cover back on.
4) Slide the power switch/device selection switch on the bottom of the mouse to
"CH1" or "CH2".
The LED will light up for a period of time.
* When the battery level is running low, the LED will blink for a period of time.
Power-saving mode
When the mouse is left untouched for a fixed period of time while the power is ON, it
automatically shifts to power-saving mode.
The mouse returns from power-saving mode when it is moved.
* Mouse operation may be unstable for 2-3 seconds after returning from the power-saving
mode.
Replacing the battery...
1) Remove the battery cover.
https://www.elecom.co.jp/support/manual_web/products/type_01-multi/enus/m-sh10bb/
User Manual - Bluetooth®5.0 3 Button Mouse M-SH10BB Series | ELECOM Co., Ltd
20/64
Advertisement
