Disassembly And Assembly Procedures; Disassembly Sop - Dell UltraSharp 38 Service Manual

5. Disassembly and Assembly Procedures

NOTE:
This "Disassembly and Assembly Procedures" is for EMEA only, not for other regions. Please note
that Dell will deem warranty void if any disassembly is done on the monitors.

5.1 Disassembly SOP

Preparation before disassembly
1. Clean the room for work
2. Identify the area for material
3. Prepare the implement, equipment, materials as bellow：
1) Working table
2) Philips-head screwdriver
3) Gloves
4) Cleaning cloth
5) ESD protection
6) U3818DW Curve Sponge Jig
Item
1
Picture
- 12 -
Operation
To remove the stand:
1. Place U3824DW
monitor on
U3818DW curve
sponge jig
2.
3. Press and hold the
stand release
button at the back
of the display
4. Lift the stand
assembly up and
away from the
monitor
Tool Notes
U3818DW Panel and
whole
curve sponge
monitor
jig
head must
be put on
U3818DW
curve
sponge jig
to avoid
panel
damage
It is not
allowed to
place the
front side of
panel and
monitor
head on a
flat surface