Disassembly And Assembly Procedures; Disassembly Sop - Dell P2725HB Service Manual

5. Disassembly and Assembly Procedures

NOTE:
This "Disassembly and Assembly Procedures" is for EMEA only, not for other regions. Please note
that Dell will deem warranty void if any disassembly is done on the monitors.

5.1 Disassembly SOP

Preparation before disassembly
1. Clean the room for work
2. Identify the area for material
3. Prepare the implement, equipment, materials as bellow：
1) Working table
2) Philips-head screwdriver
3) Hex-head screwdriver
4) Gloves
5) Cleaning cloth
6) ESD protection
Turn off the monitor.
S1
Place the monitor on a soft cloth or
S2
cushion
Press and hold the stand release button
at the back of the display
Lift the stand assembly up and away
from the monitor
Unlock 4 screws on "Rear Cover"
S3
(Screw Torque: 9±1 kgf)
Use hands or "Bar Scraper" to
S4
disassemble "Rear Cover" from "Middle
Frame" according to the sequence
shown in the picture
Pull out "Control board FFC" from
S5
"Interface board" and tear off it from
"Main Shielding" to take off "Rear
Cover"
- 11 -