Table of Contents
Advertisement
CLOCK AND DAYLIGHT SAVING SETTING
(CLOCK SET)
The default setting is as indicated below. The clock will start
after the actual time and date are set and the operations under
(TIMER SET) are completed.
Default clock settings: 01-01-2000 SAT 00:00:00
(January 1, 2000 at 00:00)
1
Press the MENU button twice to display the (CLOCK
SET) menu.
2
Example: Setting the clock to October 15, 1999 at 3:20 PM
1 Press the + (or –) button to set the month (10), then
press the c button.
2 Press the + (or –) button to set the day (15), then press
the c button.
3 Press the + (or –) button to set the year (1999), then
press the c button.
4 Press the + (or –) button to set the hours (15), then
press the c button.
5 Press the + (or –) button to set the minutes (20), then
press the c button.
NOTE: The day of the week (FRI) will be automatically set
according to the date entered.
3
Press the l button to go to (TIMER SET).
Press the MENU button to go to the next menu
screen, or
Press the EXIT button to exit the menu display.
2-
1
NOTE: To set the display mode for the clock, refer to
"DISPLAY SET (CLOCK, TITLE)" on page 44.
English
2-
2~5
27
(TIMER SET)
You can set a DAY and a NIGHT range for the 24 hour day
period, in order to set each camera mode and programmed
recording accordingly.
1
Set the daytime period start and end time.
2
Example: Day period from 7:30 AM to 7:30 PM
Night period from 7:30 PM to 7:30 AM
1 Using the + (or –) button, select (7) for the starting hour
of the DAYTIME period, then press the c button.
2 Using the + (or –) button, select (30) for the starting
minutes of the DAYTIME period, then press the c
button.
NOTE:
•
The times for the day period only need to be set. The
night period will be automatically set accordingly.
•
If the day start and end time are the same, the DAYTIME
settings will be active 24 hours a day.
3
Press the MENU button to go to the next menu
screen, or
Press the EXIT button to exit the menu display.
3
Menu 2
End time
Start time
Advertisement
Table of Contents
