Table of Contents
Advertisement
CLOCK SETUP
Example: To set the clock to October 15, 1997 at 15:20 PM.
1
Press the MENU button, make sure "1. CLOCK
SET" is selected, then press the MENU button
again.
2
Press the + (or –) button to set the day (15), then
press the « button.
Following the same procedure, set the month (10),
the year (97), the hours (15) and the minutes (20).
For accurate clock setting, press the – button
together with a time broadcast signal or other
accurate time signal, then press the O button. The
seconds will start counting from 00.
3
Press the + (or –) button to set the "SUMMER
TIME" to "STANDARD" or "SUMMER", then press
the O button.
4
Press the MENU button, then press the O button to
select "7. ENTER" and press the MENU button
again.
Concerning the Clock Display
The clock is displayed as indicated below.
For more information on how to display the clock, please refer to "CLOCK, TITLE DISPLAY" on page 20.
Split screen
(10 divisions)
NOTE:
The unit is equipped with a backup battery to maintain the clock settings. When the unit has been connected to a live
power outlet for 30 minutes or more, the battery is recharged and can maintain the clock settings for a period of up to
30 days. If the power is disconnected after having charged the battery for less than 30 minutes, that may cause a
loss of the settings.
English
Split screen
Full screen
(4 divisions)
17
Menu 1
Advertisement
Table of Contents
