Table of Contents
Advertisement
CAMERA SETTING
D
Setting the video sensor area position,
sensitivity level and response mode
1
Press the SELECT (1 – 9) button to select the desired
camera (ex: camera 6).
2
Press the NEXT button.
The live picture from the selected camera and the video
sensor setting screen for that camera are displayed.
3
Set the video sensor area position.
1
Using the l, j, d and c buttons, move the cursor to the
desired position according to the picture in the background.
2
Using the + (or –) button, set A or B for the selected point.
Every time the + button is pressed, the setting will change as
follows:
A
B
-
A...
Repeat steps 1 and 2 to set all the desired video sensor
points of the desired area(s).
•
Set the desired point(s) to setting A or B.
•
– indicates a sensor point without any setting (there are
10 lines of 16 points each), that is not used as video
sensor.
•
To erase a line of video sensor points (A or B), move the
cursor to the line to erase, then press the MENU RESET
button.
4
Set the sensor sensitivity level.
1
Using the j (or l) button highlight the "LEVEL : DAY" setting.
2
Press the c button, then using the + (or –) button set the
desired sensitivity level for the "DAY" period.
Follow the same procedure to set the desired sensitivity
level for the "NIGHT" period.
The available sensitivity levels are: OFF
1, 2, 3...10 (10 being the least sensitive, default setting), OFF.
NOTE:
The sensor sensitivity level can only be checked for the
time of the setting. (I.e., the night level setting cannot be
checked during the day.)
5
Set the sensor response mode.
1 Press the c button to highlight the "MODE" setting.
2 Using the + (or –) button set the desired mode.
•
MODE: A (default setting)
The video sensor will send a trigger when it detects movement
at the video sensor area points A.
•
MODE: A AND B
Set points A and points B at a predetermined distance, so that
only large subjects, that are detected by both video sensor
points simultaneously send an alarm trigger. Smaller objects
that are detected only by one set of video sensor points at the
time will not send an alarm trigger.
•
MODE: A AND NB (Fig. 1)
Set the video sensor points A at the centre of the main area,
and video sensor points B at the periphery, where no movement
will be detected. A trigger will be sent when change is only
detected at the video sensor points A, not at the video sensor
points B. For example, if the whole screen (A and B) brightness
changes due to a change in lighting or sunrays, a trigger is not
sent. But, if a change is detected only at the centre of the
screen (A), a trigger is sent.
6
Press the NEXT button to return to the (CAMERA
SET) menu display, or
Press the EXIT button to exit the menu display.
1, 2
6
NEXT
3
1
-
Sensor point not used
(LEVEL DAY)
4. Sensitivity level for
the day period (ex.: 8)
(LEVEL NIGHT)
4. Sensitivity level for the
night period (ex.: 10)
(Fig. 1)
42
Menu 7
3
2
-
Sensor point A
3
2
-
Sensor point B
(MODE)
5. Sensor response mode
English
Advertisement
Table of Contents
