Clock Setup - Sanyo MPX-CD16P Instruction Manual

CLOCK SETUP

Setting
1
Example: To set the clock to October 15, 1997 at 15:20 PM.
1
Press the MENU button, make sure "1. CLOCK SET" is selected, then press the MENU button again.
2
Press the + (or –) button to set the day (15), then press the « button.
Following the same procedure, set the month (10), the year (97), the hours (15) and the minutes (20).
For accurate clock setting, press the – button together with a time broadcast signal or other accurate time signal,
then press the O button. The seconds will start counting from 00.
3
Press the + (or –) button to set the "SUMMER TIME" to "STANDARD" or "SUMMER", then press the O button.
4
Press the MENU button, then press the O button to select "7. ENTER" and press the MENU button again.
Concerning the Clock Display
The clock is displayed as indicated below.
For more information on how to display the clock, please refer to "CLOCK, TITLE DISPLAY" on page 11.
Split screen
(16 divisions)
2
Split screen
(4 divisions)
3
Full screen
8
Menu 1
4
English