Sanyo MPX-CD92 Instruction Manual page 38

Sanyo mpx-cd92 multiplexor: instruction manual
Hide thumbs Also See for MPX-CD92:
Table of Contents

Advertisement

CAMERA SETTING
B1
Setting up programmed recording for each
camera
1
Press the MENU button twice to display the (TIMER
SET) menu, then check that the day and night periods
are set as desired. (For more information on the day
and night periods settings, see "TIMER SET" on page
27.)
2
Press the MENU button once to display the (VCR SET)
menu.
Press the l button to highlight the "PROGRAM REC
MODE" setting.
3
Using the + (or –) button, set "MODE1" or "MODE2".
(For more information on each mode operation, see
"PROGRAM REC MODE" on page 29.)
4
Press the MENU button four times to display the
(CAMERA SET) menu.
5
Press the SELECT (1 – 9) button to select the desired
camera (ex: camera 5).
6
Press the l button to highlight the "PROGRAM REC"
setting.
1 Press the + (or –) button to set "ON" in the DAY column,
then press the c button.
2 Press the + (or –) button to set "ON" in the NIGHT
column.
Programmed recording will be conducted according to the
"MODE1" or "MODE2" setting entered in the (VCR SET)
menu.
7
Press the MENU button to go to the next menu
screen, or
Press the EXIT button to exit the menu display.
CAMERA SET menu
PROGRAM REC
(Default setting: DAY and NIGHT to OFF)
ON: When the time set in the (TIMER SET) menu is reached,
the pictures from this camera will be recorded in priority.
OFF: Programmed recording will not be done.
English
1
MENU
2, 3
MENU
4
MENU
37
Menu 7
5, 6
5

Advertisement

Table of Contents
loading

This manual is also suitable for:

Mpx-md92

Table of Contents