JNS Aquaria Bullet-2 Quick Start Manual

Collection cup
clean the collection cup
frequently with a sponge
and warm water.
Sponge
Loosen the screw to
pick up the sponge of
water outlet, make sure
to keep it clean.
Air hose & Silencer
The air hose needs to be clear all the time, check the connected part
with the silencer often, once it's clogged, you can clean it right away.
Sometimes the silencer got clogged by limescale or unpredictable
foreign matters, clean it regularly or anytime it needs. You can pick up
the silencer by loosening the screws marked on the image.
Warranty
JNS warrants all JNS products to be free from manufacturing defects for one year from the original purchase date
when purchased through an authorized JNS retailer. This warranty does not cover any damages caused by
misuse, neglect, alterations or improper handling / transport / maintenance / installation. Physical damages are
not covered by warranty. JNS does not cover personal injury, personal loss, or other damages associated with the
use of our products. In order to request warranty service, please email us at info@jnsaquaria.com. A purchase
receipt is required for any warranty service. Products requiring warranty service must be returned to JNS. You are
responsible for the cost of shipping a warranty claim to JNS and any damages that may occur during transit.
Once a returned product has been inspected, it will be repaired or exchanged at our discretion and returned to
you. International and/or expedited shipping are not covered under your JNS warranty.
Water intake
Clean the water intake
frequently to prevent it
from being clogged.
Bullet-2
Hang-On-Back Protein Skimmer
Before Installation
Please check if there are
any damaged or lost parts.
main body
(with collection cup
and air hose)
Recommendations
1. While we take great care to keep any contaminants away from our products during assembly, please take a
moment to clean before attaching them to your tank. Please clean with warm water ONLY. Never clean Acrylic
with alcohol-based products. Use caution when handling acrylic scratches easily.
It may require 2 – 4 weeks for the skimmer to reach optimal performance due to tiny amounts of oil or
2.
remnants left from manufacturing. Skimmer performance may be erratic during this time; be sure to allow
ample time for the skimmer to break-in before making adjustments.
3. Regular maintenance of the pump will ensure a long life and maximum performance: recommended every 3
months.
For best performance, clean the collection cup frequently with a sponge and warm water.
4.
Assembly
1. Pick up the collection cup, 2. Loosen the screws marked on the
then pick up the inside image to separate the diffuser.
plate.
4. Install the diffuser to the 5. Install the
pump. Tighten the screws inlet tube and
to fix the diffuser. connect the
silencer to the
pump with
the air hose.
Do not over-tighten the screws.
www.jnsaquaria.com
info@jnsaquaria.com
Shark 0.5 pump
inlet tube
3. Combine the pump to
the inside plate.
6 . Put the inside plates
into the main body.