JNS Aquaria Bullet-1 Installation Manual

Sponge
Loosen the screw A
to pick up the
A sponge of water
outlet, make sure
to keep it clean.
Silencer
Sometimes the silencer got clogged by limescale or
unpredictable foreign matters, clean it regulary or anytime
it needs. You can pick up the silencer by unscrew the parts
that marked on the image.
Warranty
JNS warrants all JNS products to be free from manufacturing defects for one year
from the original purchase date when purchased through an authorized JNS retailer.
This warranty does not cover any damages caused by misuse, neglect, alterations or
improper handling / transport / maintenance / installation. Physical damages are not
covered by warranty. JNS does not cover personal injury, personal loss, or other
damages associated with the use of our products. In order to request warranty
service, please email us at info@jnsaquaria.com. A purchase receipt is required for
any warranty service. Products requiring warranty service must be returned to JNS.
You are responsible for the cost of shipping a warranty claim to JNS and any
damages that may occur during transit. Once a returned product has been
inspected, it will be repaired or exchanged at our discretion and returned to you.
International and/or expedited shipping are not covered under your JNS warranty.
Air hose
The air hose needs to be
clear all the time, check the
connected part with the
silencer often, once it's
clogged, you can clean it
right away.
Bullet-1
Hang-On-Back Protein Skimmer
Installation Guide
Before Installation
The Bullet-1 should be well assembled when you get it, so all you need is to check if
there's any damaged or lost parts. Then we can start to install your Bullet-1.
screw B
silencer
inlet pipe
screw A
sponge
Recommendations
1. While we take great care to keep any contaminants away from our products during
assembly, please take a moment to clean before attaching them to your tank. Please
clean with warm water ONLY. Never clean Acrylic with alcohol-based products. Use
caution when handling acrylic scratches easily.
2. It may require 2 – 4 weeks for the skimmer to reach optimal performance due to
tiny amounts of oil or remnants left from manufacturing. Skimmer performance may
be erratic during this time; be sure to allow ample time for the skimmer to break-in
before making adjustments.
3. Regular maintenance of the pump will ensure a long life and maximum
performance: recommended every 3 months.
4. For best performance, clean the collection cup frequently with a sponge and warm
water.
www.jnsaquaria.com
info@jnsaquaria.com
air hose
collection cup with lid
main skimmer body
Shark Nano pump