JNS Aquaria ConeS RC Series Quick Start Manual

Maintenance

Pump
Regular maintenance of the pump will ensure a long life and maximum performance. You can clean the
pump and its components by soaking in a general citric acid solution (citric acid:water=1:1) once every
3 months.
Lift the pump softly to Pull out the venturi.
separate the pump.
Collection cup
The collection cup should be cleaned
frequently with a sponge and warm water.
(DO NOT USE ANY SOAP OR CHEMICALS)
For daily maintenance, pull out the plug of
the drain tube to let out the skimmate.
Venturi
The venturi should be cleaned monthly and flushed weekly, due to
the air to water interface calcium carbonate (limescale) builds up to
form a very hard white substance.
Remove the limescale by soaking in a general citric acid solution
(citric acid:water=1:1)

Warranty

JNS warrants all JNS products to be free from manufacturing defects for one year from the original purchase date when
purchased through an authorized JNS retailer. This warranty does not cover any damages caused by misuse, neglect,
alterations or improper handling / transport / maintenance / installation. Physical damages are not covered by warranty.
JNS does not cover personal injury, personal loss, or other damages associated with the use of our products. In order to
request warranty service, please email us at info@jnsaquaria.com. A purchase receipt is required for any warranty services.
Products requiring warranty service must be returned to JNS. You are responsible for the cost of shipping a warranty claim
to JNS and any damages that may occur during transit. Once a returned product has been inspected, it will be repaired or
exchanged at our discretion and returned to you. International and/or expedited shipping are not covered under your JNS
warranty.
Turning to separate Pull out the
the nut ring. pre-chamber
rotor
bearing *2
the bearings should be in position
Footprint (mm)
Height (mm)
Pump
Pull out the rotor
Filtration Rating (L)
Light Bioload
Heavy Bioload
Recommended
Water Level (mm)
Before installation and operation
Please open the package carefully and check if there's any damage or missing part.
Main Body
Recommendations
While we take great care to keep any contaminates away from our products during assembly, please
1.
take a moment to clean the skimmer and plumbing before attaching to your tank. Only clean your
skimmer with warm water. Never clean Acrylic with alcohol based products. Use caution when
handling as acrylic scratches easily.
It may require 2 ‒ 4 weeks for the skimmer to reach maximum performance due to tiny amounts of oil
2.
or remnants left from manufacturing. Skimmer performance may be erratic during this time and be
sure to allow ample time for the skimmer to break-in before making adjustments.
Regular maintenance of the pump will ensure a long life and maximum performance: recommended
3.
every 3 months.
For best performance, please clean the collection cup frequently. Use a sponge and warm water to
4.
clean it. (DO NOT USE ANY SOAP OR CHEMICALS TO CLEAN THE COLLECTION CUP).
ConeS RC Series
In-Sump Protein Skimmer
RC-2 / RC-3
RC-2 RC-3
355x185 or 390x190 390x240 or 410x240
565 605
SHARK 2.0 SHARK 3.0
(22W) (27W)
1200 L 1800 L
640 L 1100 L
200 - 250 mm 200 - 250 mm
SICCE SHARK pump
Collection cup
with lid
Drain tube
*** The pump must be
completely submerged
underwater when in use
< Accessories Box>
Screw
for Silencer
Silencer
Ø 25mm hose Ø 10mm hose