iRobot Roomba Combo i5+ Owner's Manual page 13
Robot vacuum
Hide thumbs
Also See for Roomba Combo i5+:
- User manual ,
- Owner's manual (66 pages) ,
- Owner's manual (50 pages)
Table of Contents
Advertisement
Available languages
Available languages
Cleaning the Edge-Sweeping
Brush
1
Use a small screwdriver to loosen the
screw holding the Edge-Sweeping Brush
EN
in place.
2
Pull to remove the Edge-Sweeping Brush.
Remove any hair or debris, then reinstall
the brush.
8
For more information, visit global.irobot.com
Cleaning the Front Caster Wheel
1
Pull firmly on the front wheel module to
remove it from the robot.
Important:
A front wheel clogged with
hair and debris could result in damage
to your floor. If the wheel is not
spinning freely after you have cleaned
it, please contact Customer Care.
2
Pull firmly on the wheel to remove it from its
housing
Axle
Wheel
Housing
3
Remove any debris from inside the wheel
cavity.
4
Reinstall all parts when finished. Make sure
the wheel clicks back into place.
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the Roomba Combo i5+ and is the answer not in the manual?
Questions and answers
Do I have to take the white bumpers off
irumba bags do not snap into place
The iRobot Roomba Combo i5+ bags may not snap into place if the bag is full, not inserted correctly, or if the bag compartment cover is not properly closed. Make sure the bag is properly aligned with the guide rails and fully inserted before closing the lid.
This answer is automatically generated