iRobot Roomba Combo i5+ Owner's Manual page 12
Robot vacuum
Hide thumbs
Also See for Roomba Combo i5+:
- User manual ,
- Owner's manual (66 pages) ,
- Owner's manual (34 pages)
Table of Contents
Advertisement
Available languages
Available languages
Cleaning the Filter
1
Remove the bin. Remove the filter by
grasping both ends and pulling out.
2
Remove debris by tapping the filter against
your trash container.
3
Reinsert filter with ridged grips facing out.
Place bin back in the robot.
Important:
The robot will not run if
the filter is not installed correctly.
Replace the filter every two months.
Cleaning the Full Bin Sensors
1
Remove and empty the bin.
2
Wipe the inner sensors with a clean, dry
cloth.
3
Wipe the bin door with a clean, dry cloth.
Closed Door
Open Door
Washing the Bin
Important:
Do not wash the filter. Remove
the filter before washing the bin.
1
Release the bin, remove the filter, and open
the bin door.
2
Rinse the bin using warm water.
Note:
Bin is not dishwasher safe.
3
Make sure bin is completely dry. Reinsert
filter and place bin back in the robot.
Roomba
i5+ Owner's Guide
®
EN
7
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the Roomba Combo i5+ and is the answer not in the manual?
Questions and answers
Do I have to take the white bumpers off
irumba bags do not snap into place
The iRobot Roomba Combo i5+ bags may not snap into place if the bag is full, not inserted correctly, or if the bag compartment cover is not properly closed. Make sure the bag is properly aligned with the guide rails and fully inserted before closing the lid.
This answer is automatically generated