Table of Contents
Advertisement
Appendix B—Remote Control Operation
Circulating Fan Operation
(if equipped)
Circulating fan has 4 speed levels from
low to high (1 to 4 bars).
Press SET to scroll to
level icons ash.
To set speed, press ame buttons:
= increases speed.
= decreases speed and
turns OFF fan when all bars disappear.
Note: 8 seconds after the fan is set, handset goes
automatically in temperature control mode. Fan
starts 4 minutes after gas opens (from OFF or
pilot) at maximum speed then goes to displayed
level after 10 seconds. Fan stops 10 minutes after
gas is OFF or at pilot.
Setting high / low Temperatures
Setting "DAYTIME" high temperature.
Default Settings:
TEMP
Press SET to scroll to
Hold SET button until TEMP ashes.
To set
Daytime Temperature:
= increases temperature.
= decreases temperature.
Press
or wait to complete setting.
Setting "NIGHT TIME SETBACK" low temperature.
Default Settings:
T E M P
Press SET to scroll to
Hold SET button until TEMP ashes.
To set
Night Time Temperature:
= increases temperature.
= decreases temperature.
Press
or wait to complete setting.
. Fan and
23 °C/74 °F
TEMP
"--" (OFF)
T E M P
Setting Program Timers
You can program two periods of time between 12 am
and 11:50 pm in each 24-hour cycle.
Programs P1 and P2 must be set in the following order
during a 24-hour cycle:
= Day Time temperature (high) program period
= Night Time temperature (low) program period
Default Settings:
Program 1:
06:00 am
P1
Program 2:
11:50 pm
P2
Press SET to scroll to
TIMER
If
=
P1
P1
programming is cancelled.
To keep replace ON all night, set
11:50 am and
If you want to program only one period,
program
P1
then
and
P2
as
.
P1
Setting P1
time - high temperature.
Hold SET button until
P1
ashes.
To set time:
= hour
= minutes
Press
or wait to complete setting.
Setting P1
time - low temperature.
Hold SET button until
P1
and time ashes.
To set time:
= hour
= minutes
Press
or wait to complete setting.
,
,
and
P1
P1
P2
08:00 am
P1
11:50 pm
P2
.
or
=
,
P2
P2
P2
at 12:00 am.
P1
and
with desired times
P1
with the same time
P2
is displayed and time
is displayed
.
P2
at
39
Advertisement
Table of Contents
