Operation Limits; Operation With Access Ramps; Load/Unload Weighing System - KERN KFP V40 Installation Instructions Manual

Weighing bridge

Hide thumbs Also See for KFP V40:

Table of Contents

7.1 Operation limits

• The weighing bridges are designed extremely robust. However the load limits

according to the following table should not be exceeded!

• Depending on the type of load receptacle, the static carrying capacity, i.e. the

maximum admissible load is:

• The load plate of the weighing bridge is an active weighing element, the access

ramps are passive, i.e. during the weighing process all wheels of the conveying

vehicles must rest on the load plate.

• The air gap between the load plate and the access ramps must be free. Especially

for weighing of grainy or small-piece weighing goods, the gap should be controlled

regularly and kept clear.

• Place the load on the scales using a lifting truck, a crane or a forklift truck. Ensure

that the load is not swinging when it is placed onto the scales.

• Lift the load first vertically at least 10 cm above the scales before it is removed or

newly placed.

KFP V40-IA-e-1211

Weighing ranges

With centrical load

With side stress

With one-sided loading

With single-wheel load

1500kg

4500kg

3000kg

1500kg

800kg

Table of Contents