Table of Contents
Advertisement
CONNECTIONS
Connect the video camera and TV monitor as shown in the figure below.
NOTE:
Before making the connections, make sure the devices are disconnected from the power outlet.
Power Cord Installation
1
Plug the supplied power cord firmly into the AC
power input AC IN ~ socket.
2
Insert the plug of this power cord into a outlet.
Video camera
(sold separately)
From an external
audio source
OPEN COLLECTOR
1=500mA(Max.)
2= 50mA(Max.)
AC IN
PUSH
OPEN
Power cord
To remote control
(sold separately)
To outlet
TV Monitor (sold separately)
To
VIDEO
IN
jack
SHORT FOR
RS485 A
COM
RS485 B
TERMINATION.
COM
RS485 B
RS485 A
CLOCK IN
EJECT IN
WARNING OUT 1
TAPE END
SW OUT
(
SERIES
)
OUT 2
ALARM IN
SERIES IN
COM
CLOCK OUT
EJECT OUT
AUDIO
VIDEO
IN
IN
OUT
REMOTE
MIC IN
OUT
To
VIDEO
OUT
jack
NOTES:
œ The grounded power cord (3-pin plug) must be
connected to a grounded power outlet.
œ For more details, please refer to the manuals
accompanying all other devices. If the connections
are not made properly, it may cause a fire or damage
the equipment.
œ You can use a VA-RMN01 Remote Control Unit (sold
separately) to control the VCR remotely.
œ If there is no video signal when the power is turned
on, "NO VIDEO" will be displayed on-screen.
8
Coaxial
cable
(sold
separately)
English
Advertisement
Table of Contents
