Setting The Cassette Eject Mode - Sanyo SRC-850A Instruction Manual

Sanyo src-850a: instruction manual
Table of Contents

Advertisement

SETTING THE CASSETTE EJECT MODE

Cassette Eject Setup
When using two or more VCRs, the cassette tapes of all
the VCRs or some of the VCRs can be ejected at the
same time.
1
Press the MENU button to display the MAIN MENU.
2
Press the l (or j) button to select the "5.WARNING
OUT/EJECT SET" line, then press the ENTER
button.
ø The (WARNING OUT/EJECT SET) menu
appears.
<WARNING@OUT@SET>SET@UP
ALARM@@@@@@@@@@@@Y
NON@REC@@@@@@@@@@N
MECHA.PROBLEM@@@@Y
<EJECT@SET>
EJECT@MODE@@@@@@@EJECT1
OPERATION@@@@@@@@SLAVE
3
Press the l (or j) button until the "EJECT MODE"
setting is highlighted, then press the ENTER button.
4
Press the l (or j) button to select the desired
cassette eject mode, then press the ENTER button.
EJECT1 . . . . The cassette is ejected only if the
VCR is not in recording or
recording pause mode.
EJECT2 . . . . The cassette is ejected only if the
VCR is in stop mode.
5
Press the l (or j) button until the "OPERATION"
setting is highlighted, then press the ENTER button.
6
Press the l (or j) button to select the desired
operation, then press the ENTER button.
SLAVE . . . . . The function is restricted to only
the VCR being operated.
MASTER . . . The function is applied to the VCR
being operated and all VCRs that
are connected after it.
7
Press the MENU EXIT button.
NOTE:
œ The EJECT button will not be operative during
recording mode.
English
Connection
VCR No. 1
EJECT IN
COM
EJECT OUT
EJECT IN terminal
œ Depending on the "EJECT MODE" setting in the
(WARNING OUT/EJECT SET) menu (see "Cassette
Eject Setup"), the cassette loaded into the VCR can
be ejected when there is input to this terminal.
EJECT OUT terminal
œ A signal is output from this terminal when the EJECT
button is pressed (if the VCR is set up as the
"MASTER" VCR; see step 6 under "Cassette Eject
Setup") or when there is input (a trigger) at the EJECT
IN terminal, even if the security lock is set or a
cassette is not loaded.
31
VCR No. 2
EJECT IN
COM
EJECT OUT
To EJECT IN terminal
To COM terminal

Advertisement

Table of Contents
loading

This manual is also suitable for:

Audio system

Table of Contents