Advertisement
Lamp replacement
Removing the car body
I
f you would like to access the interior of the car to add figures or other details to the interior,
the body can be removed with just three or four screws. Body screws are located in each cor-
ner of the car. These are the larger screws closest to the centerline of the car as shown in figure
2 on page 5. You do not need to remove the coupler assembly to separate the car body.
On observation cars, a single screw in the center holds the curved end. Be careful not to
pinch the wires for the LED lighting board when reassembling the car.
7
Advertisement
