•
Camera should be "tight" against the mounting plate. Check
tightness using a coin or screwdriver (preferred).
Camera is not functioning normally underwater
•
Ensure that the camera mounting plate is pushed all of the way into
the housing mounting plate.
•
Check each housing control while underwater to ensure that
they are disengaged. An inadvertently engaged control may limit
functioning of the camera.
Backscatter or "snow" in images
•
Position strobes or lights farther away from your lens and at a slight
angle.
•
Avoid using strobes in extremely low-visibility conditions.
Spare Parts
•
Spare Rear O-Ring # 0110
•
Spare Front O-Ring # 0132.36
•
Waterproof bulkhead cap # 9104.7
•
Port Securing Thumbscrews (Set of 3) # 9249.6
Limited Warranty
This Ikelite product is warranted against any manufacturing defects for
a period of two (2) years from the original date of purchase. Defective
products should be returned to Ikelite postage paid. Ikelite will, at
its sole discretion, repair or replace such products, and will return to
customer postage paid. All other claims of any nature are not covered.
Except as mentioned above, no other warranty expressed or implied
applies to this Ikelite product.
19