Ikelite 6950.13 Manual page 18

•
Adjust exposure compensation in the camera.
•
Adjust lighting power.
Photos are under-exposed (too dark)
•
Adjust aperture (larger), shutter speed (slower), or ISO (higher)
setting.
•
Move light(s) closer to your subject.
•
Adjust exposure compensation in the camera.
•
Adjust lighting power.
Strobe will not fire
•
Turn on strobe and make sure it is properly charged.
•
Remove Hotshoe from camera mount if using a fiber optic strobe.
The internal camera flash is disabled when the Hotshoe is
connected.
•
Make sure that the camera's flash is set to fire on every photo.
•
Check that the fiber optic cord or sync cord is properly attached.
Buttons are stuck
•
Soak the housing in lukewarm fresh water. Depress each button
several times while the housing is submerged.
•
Apply lubricant to the button. Press the button several times to
distribute the lubricant.
Button(s) or control(s) do not line up
•
Ensure that nothing is preventing the camera from going into the
housing.
•
Push the camera mounting plate forward until it is flush with the
housing base plate.
18