ICON PRO-FORM SPORT FLAT BENCH XT User Manual page 7

3. Attach the Bench (3) to the Frame (1) with
three M8 x 55mm Screws (7) and three M8
Washers (9); start all the Screws, and then
tighten them. To avoid damaging the Bench,
tighten the Screws only until the Bench does
not move or feel loose.
4. Make sure that all parts of the weight bench are properly tightened. Extra parts may be included. Place a
mat under the weight bench to protect the floor.
3
3
1
9
7
7
9
9
7
7