Table of Contents
Advertisement
Before Operating (Continued)
DISC Finalize
Finalizing fixes the recordings in place so that the disc
can be played on a regular DVD player or computer
equipped with a suitable DVD-ROM drive.
Finalizing a Video mode disc creates a menu screen for
navigating the disc. This is accessed by pressing DISC
MENU/LIST or TITLE.
Caution
Once you have finalized a DVD-R disc, you cannot
edit or record anything else on that disc.
However, you can record and edit a DVD-RW disc
by choosing Unfinalize.
DISC Initialize
DISC Finalize
DISC Name
DISC Protect
1 1
Follow steps 1-3 as shown on page 24 (DISC
Initialize).
2 2
Use v / V to select the DISC Finalize option.
3 3
Press B to move to the third level.
Finalize is highlighted.
4 4
Press ENTER.
Finalize menu appears.
Finalize
Do you want to finalize the disc?
OK
5 5
Use b / B to select OK then press ENTER.
The VCR/DVD Recorder starts finalizing the disc.
ote
The amount of required time for finalization depends on
the type of disc, the volume of recorded contents, and
the number of title on the disc. A recorded disc can take
up to 3-4 minutes to finalize.
ip
If you load a DVD-RW that has already been finalized
on a different DVD Recorder, you can "un-finalize" it by
choosing Unfinaliza from the DISC Finalize menu. After
doing this, you can edit and re-record onto the disc.
Finalize
Unfinalize
Prev.
Select
Cancel
DISC Protect
When recording in VR mode, set to ON to prevent acci-
dental recording, editing, or erasing of the disc loaded.
If you need to unlock the disc to make edits, select
OFF.
DISC Initialize
DISC Finalize
DISC Name
DISC Protect
OFF
ON
Prev.
Select
25
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
