Front Panel - Sanyo DRW-1000 Instruction Manual

Front Panel

POWER button
Switches the VCR/DVD Recorder ON and OFF.
OPEN/CLOSE (Z)
Opens or closes the disc tray.
Disc Tray (DVD deck)
Insert a disc here.
DV IN
Connect the DV output of a
digital camcorder.
S-VIDEO (S-VIDEO IN)
Connect the S-Video output of an external source
(TV/ Monitor, VCR, Camcorder, etc.).
AV INPUT (VIDEO IN/AUDIO IN (Left/Right))
Connect the audio/video output of an external source
(Audio system, TV/ Monitor, VCR, Camcorder, etc.).
DVD: Goes to beginning of the current chapter/track or to previous chapter/track.
VCR: Rewinds the tape during the STOP mode or for fast reverse picture search.
DVD: Goes to NEXT chapter/track. Press and hold for two seconds for a fast forward search.
VCR: Advances the tape during the STOP mode or for fast forward picture search.
10
Display Window
Shows the current status of
the VCR/DVD Recorder.
Points the VCR/DVD Recorder
remote control here.
EASY DUB
Presses to copy DVD to
VCR (or VCR to DVD).
CHANNEL (v / V)
Scans up or down
through memorized
channels.
Press and hold for a fast reverse search.
Toggles control between the DVD
deck and the VCR deck.
Cassette Compartment (VCR deck)
Insert a video cassette here.
Ejects the tape in the VCR deck.
Remote Sensor
REC (z)
Starts recording. Press
repeatedly to set the
recording time.
STOP (x)
Stops playback.
PAUSE (X)
Pauses playback or recording
temporarily. Presses repeatedly
for frame-by-frame playback.
REW (m)
Plays back a disc or tape.
DVD/VCR
EJECT (Z Z )
PLAY (N)
FF (M)