Download  Print this page

Sanyo ECD-T1540 Operating Instructions Manual page 27

High power fm/am stereo receiver, cd player
Hide thumbs

Advertisement

SIRIUS MODE SELECTION ................................(5)
Press LOC/S-MOD button (5) to switch Category mode, Skip mode or normal. It is used as the
selection of each:
Normal
When Category mode or Skip mode is engaged, the "CATEGORY" or "SKIP" function is turned
on in the display. When Category mode or Skip mode is released, the "CATEGORY" or "SKIP"
function is turned off. When Direct mode is engaged, "DIRECT" of alphanumeric display is turned
on.
Select Category and TUNE UP/DOWN within selected Category
Use CAT
button (7) or
BND/LOUD/ENTER button (2).
In Category mode, stations can be tuned within the same category.
-
When the user wishes to search by Category, press LOC/S-MOD button (5) can be pressed
until it goes into Category search mode.
-
Press CAT
button (7) or
-
To change channels, press LOC/S-MOD button (5) again to Normal mode, and then press
MANU/SKIP
The operation of skip channel function
In Skip mode, pressing LOC/S-MOD button (5) for more than 3 seconds sets the SKIP channel
mode. Details for set or release skip channel is as follows.
Use MANU/SKIP
sequentially.
-
Press BND/LOUD/ENTER button (2) to select skip or release the following channel. (If the
channel was skipped, the "SKIP" icon will be displayed.
-
Press LOC/S-MOD button (5) for more than 3 seconds again to return to basic mode
automatically after 10 seconds.
Note:
In skip mode, use MANU/SKIP
How to direct tune
1. In direct mode, display shows DIRECT and "000" channel number. (Hundred Digit flashing
on/off)
2. Use MANU/SKIP
3. Press LOC/S-MOD button (5) again to confirm entry of the hundred digit and the 10s digit is
flashing on/off.
4. Use MANU/SKIP
5. Press LOC/S-MOD button (5) again to confirm entry of the 10s digit and the 1s digit is
flashing on/off.
6. Press LOC/S-MOD button (5) again to confirm entry of the 1s digit.
7.
Press BND/LOUD/ENTER button (2) to direct tune.
Category mode
CAT button (6) to select desire Category and press
CAT button (6) up and down to get to the desired category.
or
button (3) to select the channel up or down.
or
button (3) to be switched to SKIP channel set or release mode
or
or
button (3) to select hundred digit.
or
button (3) to select 10s digit.
Direct Tune
Skip Channel mode
button (3) to show skipped channels.
3

Advertisement

loading

  Also See for Sanyo ECD-T1540

  Related Manuals for Sanyo ECD-T1540