Product Specifications - Ryobi R18XPHTA0 Manual

PRODUCT SPECIFICATIONS

HP pole hedge attachment
Model
Blade length
Cutting capacity
Maximum product working length
Weight
For assembling with battery-driven telescopic pole (below
values measured with R18EZRP0 telescopic pole)
Rated voltage
No-load speed
Weight (with telescopic pole and
without harness)
Vibration level (in accordance with EN 62841-1 and EN 62841-4-2)
Front handle
Rear handle
Uncertainty of measurement
Noise emission level (in accordance with EN 62841-1 and EN
62841-4-2)
A-weighted sound pressure
level
Uncertainty of measurement
A-weighted sound power level
Uncertainty of measurement
NOTE: Visit your local special orders desk or contact RYOBI
customer service for replacement parts.
WARNING! The declared vibration total values and the
declared noise emission values given in this instruction
manual have been measured in accordance with a
standardised test and may be used to compare one tool with
R18XPHTA0
another. They may be used for a preliminary assessment
450 mm
of exposure.
22 mm The declared vibration and noise emission values represent
the main applications of the tool. However, if the tool is used
3.1 m
for different applications, used with different accessories,
1.38 kg
or poorly maintained, the vibration and noise emission
may differ. These conditions may significantly increase the
exposure levels over the total working period. An estimation
of the level of exposure to vibration and noise should take
18 V d.c.
into account the times when the tool is turned off or when
it is running idle. These conditions may significantly reduce
3200 spm
the exposure level over the total working period.
3.2 kg
Identify additional safety measures to protect the operator
from the effects of vibration and noise, such as maintaining
the tool and the accessories, keeping the hands warm (in
case of vibration), and organising work patterns.
1.3 m/s²
1.7 m/s²
1.5 m/s²
85.2 dB(A)
3 dB
93.2 dB(A)
3 dB