protected supply. Use of an RCD reduces the risk of IMPORTANT! electric shock. It is essential that you read the instructions in this manual PERSONAL SAFETY before assembling, operating, and maintaining the product. ■ Stay alert, watch what you are doing and use common sense when operating a power tool.
tool repaired before use. Many accidents are caused ■ Carry the hedge trimmer by the handle with the blade stopped and taking care not to operate any by poorly maintained power tools. power switch. Proper carrying of the hedge trimmer will ■...
● before leaving the product unattended MAINTENANCE ● before checking for damage after striking a foreign ■ Use only original manufacturer’s replacement parts, object accessories, and attachments. Failure to do so can cause ● before performing maintenance possible injury, can contribute to poor performance, and ●...
Beware of thrown or flying objects. Keep all bystanders, especially children and pets, at least 15m away from the operating area. Regulatory Compliance Mark (RCM). This product meets applicable regulatory requirements. Remove the battery pack before starting any work on the product. Waste electrical products should not be disposed of with household waste.
Page 7
Always wear safety goggles or safety Install HEDGESWEEP debris Install the battery pack until the latches glasses with side shields when sweeper. Remove the blade cover. click into place. Make sure that the operating product. Wear battery pack is securely attached protection.
Page 8
Operating the Cleaning the Storing the product Rotating the rear p.11 p.12 p.10 product product handle...
OPERATING THE PRODUCT CAUTION: Always use two hands to operate the product, which is fitted with two handles. WARNING: Keep hands away from the blades at all times. 1. Install HEDGESWEEP debris sweeper and remove the blade cover. 2. Install the battery pack until the latches click into place.
Page 10
90° 90° ROTATING THE REAR HANDLE 1. Press the handle rotation button. Turn the handle to the right or to the left until it clicks. NOTE: The handle can be rotated 45° or 90° to the left or to the right. 2.
CLEANING THE PRODUCT WARNING: The product does not have an off switch and continues to operate when both the front and rear triggers are squeezed. 1. Press and hold the latch to release the battery pack. 2. Remove HEDGESWEEP debris sweeper.
STORING THE PRODUCT WARNING: The product does not have an off switch and continues to operate when both the front and rear triggers are squeezed. NOTE: Remove all foreign materials from the product before storing. 1. Remove the battery pack. 2.
BCL14181H, BCL14183H, BCS618, RC18627, Compatible RC18627U, RC18150, RC18150U, RC18120, chargers RC18115, RC18118C, BCL1418IV* *BCL1418IV is compatible for charging in vehicles with 12 V d.c. outlets. NOTE: Visit your local special orders desk or contact RYOBI customer service for replacement parts.
Page 16
Techtronic Industries N.Z. Limited Unit C, 70 Business Parade South, Highbrook, Auckland 2013, New Zealand RYOBI is a trade mark of Ryobi Limited, and is used under license. HEDGESWEEP is a trade mark of Techtronic Outdoor Products Technology Limited. 960737076-01...
Need help?
Do you have a question about the One+ R18HTR22 and is the answer not in the manual?
Questions and answers