Control Valve Handling; Receive The Control Valve; Store The Control Valve - DANIEL V707 User Manual

SPRING LOADED BACK PRESSURE VALVE
User manual
DAN-20064957
3

Control valve handling

3.1

Receive the control valve

EQUIPMENT HANDLING AND OPERATING HAZARD
Wear personal protective equipment appropriate to the situation when working with
the control valve. Adhere to all safety standards and best practices for operating the
equipment.
Failure to comply may result in death or serious injury.
3.1.1 Unpack and inspect the control valve
Check the control valve when it is received at the customer facility.
Procedure
3.2

Store the control valve

3.2.1 Rust inhibitor
Apply light oil or rust inhibitor on surfaces that are in contact with the environment.
3.2.2 Pack the control valve
Procedure
User manual
22
www.Daniel.com
WARNING
1. Remove the control valve from the shipping container.
2. Inspect the control valve for damage.
3. See Installation procedure.
1. Use stretch wrap (not adhesive) to attach the correct size flange cover to the valve
end flanges. This protects the unpainted surfaces of the flange sealing.
2. A flush contact between the flange cover and the flange sealing face is important.
Control valve handling
August 2019
27