Configure The Control Valve - DANIEL V707 User Manual

SPRING LOADED BACK PRESSURE VALVE
User manual
DAN-20064957
EQUIPMENT HANDLING AND OPERATING HAZARD
Wear personal protective equipment appropriate to the situation when working with
the control valve. Adhere to all safety standards and best practices for operating the
equipment.
Failure to comply may result in death or serious injury.
3.5

Configure the control valve

The factory configures Daniel control valve internal components. Inspect the internal
components before installation.
3.5.1 Orientation and position of the control valve
Flow direction
NOTICE
Comply with local government regulations and company requirements.
NOTICE
Flush lines to remove welding bead, pipe scale, etc.
NOTICE
Install the valve in a horizontal line with the cylinder head at the top.
User manual
26
www.Daniel.com
WARNING
Control valve handling
August 2019
31