Control Valve Handling; Receive The Control Valve; Unpack And Inspect The Control Valve; Store The Control Valve - DANIEL 762 User Manual

3

Control valve handling

Topics covered in this chapter:
•

Receive the control valve

•

Store the control valve

3.1 Receive the control valve
WARNING!
EQUIPMENT HANDLING AND OPERATING HAZARD
Wear personal protective equipment appropriate to the situation when working with the
control valve. Adhere to all safety standards and best practices for operating the equipment.
Failure to comply may result in death or serious injury.
3.1.1

Unpack and inspect the control valve

Check the control valve when it is received at the customer facility.
1. Remove the control valve from the shipping container.
2. Inspect the control valve for damage.
3. See Chapter 6
3.2 Store the control valve
3.2.1

Rust inhibitor

Apply light oil or rust inhibitor on surfaces that are in contact with the environment.
3.2.2

Pack the control valve

1. Use stretch wrap (not adhesive) to attach the correct size flange cover to the valve
end flanges. This protects the unpainted surfaces of the flange sealing.
2. A flush contact between the flange cover and the flange sealing face is important.
3.2.3

Storage conditions

Store the control valve in a safe area to avoid damage.
User manual
for Installation Procedure.
USER MANUAL
Control valve handling
55
61
www.Daniel.com